CRK with Controller RS-485 Communication Cable

User avatar
om_tech_support_JT
Posts: 1058
Joined: Fri Mar 12, 2010 2:59 pm
Location: Torrance, CA
Contact:

CRK with Controller RS-485 Communication Cable

Postby om_tech_support_JT » Fri May 07, 2010 10:29 am

Q: Where can I locate the required RJ45 Connector and Cable for the CRK with Built-in Controller?

A: The CRK Series with a built in controller is a compact, space saving 5-phase stepping motor and driver package with a powerful, feature-rich controller built in. The driver supports stand alone or RS-485 communications with multi-drop capability for network operation and I/O control. In order to communicate with the driver/controller, you will need to provide a communications cable. The RJ45 connector and CAT5 cable that are needed can be found at most computer, electronics or hardware stores.
For a more in-depth look on how to wire the communication cable, see the following video:
http://www.youtube.com/watch?v=fH0B7MeUIFA

manuels
Posts: 4
Joined: Wed Apr 15, 2015 10:36 am

Re: CRK with Controller RS-485 Communication Cable

Postby manuels » Wed Mar 30, 2016 11:03 am

The video in the link shows up as private.


Return to “Stepping Motors & Controls”

Who is online

Users browsing this forum: No registered users and 1 guest