Page 1 of 1

DiviceNet Protocol

Posted: Sat Jun 25, 2016 7:08 pm
by bgmathes
Any chance Oriental Motor Engineering is working on a DeviceNet protocol that will work with the Flex line of drivers?

Re: DeviceNet Protocol

Posted: Tue Jun 28, 2016 11:36 am
by om_tech_support_JT
HI bgmathes,

We do offer AR Flex drivers that are compatible with DeviceNet. However, they are not USA standard products, and we cannot support it because all documentation is in Japanese. Our standard communication protocol for our USA standard Flex drivers is Modbus RTU via RS-485 network connection. ProFace offers HMI solutions that can be easily integrated with our AR, RK2 and BLE Flex drivers. We offer network converters / gateways for other protocols such as CC-Link, Mechatrolink, and Ethercat. We can recommend a 3rd party gateway for Ethernet IP as well.

For connection examples for ProFace HMI + OM Flex, please click: http://global.pro-face.com/content/conn ... tor-co-ltd

For a full network brochure for Flex products, please see attached.

Re: DiviceNet Protocol

Posted: Sat Jul 02, 2016 9:18 pm
by bgmathes
Thank You for your reply.

I am using JTEKT Corporation PLC, which has very little U.S. support available. Their PLC has devicenet master module, which we are using to communicate with other manufacturers products. I would be interested in getting more information on the AR Flex drives with device net protocol, even without the support. Can I purchase these ? and exchange the ones I have? What would be the lead time?
Thank You

Re: DiviceNet Protocol

Posted: Wed Jul 06, 2016 5:39 pm
by om_tech_support_JT
Hi bgmathes,

Before you decide to go with a non-standard AR series DeviceNet driver, I would suggest that you check if the AR Flex product is returnable. Some products are not returnable. We do not allow product swaps/exchanges since we're a build-to-order company. You can either check with techsupport@orientalmotor.com or your local office where you purchased our products from.

For the AR DeviceNet driver, the lead time is 7 business days to ship from one of our US factories. All literature is in Japanese. These non-standard drivers would be non-cancellable and non-returnable.

Re: DiviceNet Protocol

Posted: Sat Sep 17, 2016 3:05 am
by aldoned
Thank you

Re: DiviceNet Protocol

Posted: Sat Feb 25, 2017 8:38 pm
by jackseasonna
follow