Connecting a PADG-SB (NPN type home sensor) to SCX11

User avatar
om_tech_support_JT
Posts: 1058
Joined: Fri Mar 12, 2010 2:59 pm
Location: Torrance, CA
Contact:

Connecting a PADG-SB (NPN type home sensor) to SCX11

Postby om_tech_support_JT » Thu Jul 11, 2013 10:18 am

Q: I have been using the SCX10 and a DG series rotary table from your company for quite some time now. I just made the switch over to the newer SCX11 and the newer DG II series rotary tables. I need help verifying the wiring of my PADG-SB NPN type home sensor to the SCX11 controller. You do not show this wiring diagram in your SCX11 manual. It would be easier if you can provide one.

A: Unfortunately, we do not show a dedicated wiring for the PADG-SB or PADG-SBY home sensor to the SCX11 controller. We actually refer to the connection example on page 32 of the SCX11 manual. If you imagine one of the outputs from the PLC as a home sensor switch, then it makes more sense. The home sensor would connect to one of the pins on the SCX11 green Phoenix 16 pin I/O connector, but 1st you'll have to assign the "home sensor" function to one of the inputs in order for it to work. In the connection example below, we're making IN3 (pin 10) the HOMELS input on the SCX11.
SCX11 assigning home sensor input to IN3 with IMC GUI.jpg
SCX11 assigning home sensor input to IN3 with IMC GUI.jpg (316.8 KiB) Viewed 1957 times


REVISED CONNECTION EXAMPLE FOR NPN HOME SENSOR TO SCX11:
Connecting PADG-SB NPN Home Sensor to SCX11.jpg
Connecting PADG-SB NPN Home Sensor to SCX11.jpg (172.3 KiB) Viewed 1957 times


ADDITIONAL NOTES: on the SCX11 side, you'll also have to wire 5/24VDC into IN-COM (pin 1). On the sensor side, you'll also have to supply 5~24VDC for sensor power to the BROWN/PINK wires; depending on if you want normally closed or normally open.

User avatar
om_tech_support_JT
Posts: 1058
Joined: Fri Mar 12, 2010 2:59 pm
Location: Torrance, CA
Contact:

Re: Connecting a PADG-SB (NPN type home sensor) to SCX11

Postby om_tech_support_JT » Wed Aug 07, 2013 10:00 am

Updated image with 24VDC connection to pin1 on 16 pin I/O connection terminal (power for input circuit):
Connecting PADG-SB NPN Home Sensor to SCX11.jpg
Connecting PADG-SB NPN Home Sensor to SCX11.jpg (173.79 KiB) Viewed 1905 times

User avatar
om_tech_support_JT
Posts: 1058
Joined: Fri Mar 12, 2010 2:59 pm
Location: Torrance, CA
Contact:

Re: Connecting a PADG-SB (NPN type home sensor) to SCX11

Postby om_tech_support_JT » Tue Sep 10, 2013 12:27 pm

Here we are showing the SCX11 programmble input wiring diagram with a PADG-SB home sensor wiring diagram. It's easier to understand when you put them side by side:

SCX11, PADG-SB wiring diagrams side by side.jpg
SCX11, PADG-SB wiring diagrams side by side.jpg (170.13 KiB) Viewed 1846 times

User avatar
om_tech_support_JT
Posts: 1058
Joined: Fri Mar 12, 2010 2:59 pm
Location: Torrance, CA
Contact:

Re: Connecting a PADG-SB (NPN type home sensor) to SCX11

Postby om_tech_support_JT » Tue Sep 10, 2013 4:17 pm

REVISED CONNECTION EXAMPLE FOR NPN HOME SENSOR TO SCX11:
-I've traced the current flow path in order to help you better understand.

SCX11 to PADG-SB NPN type home sensor dedicated wiring diagram.jpg
SCX11 to PADG-SB NPN type home sensor dedicated wiring diagram.jpg (243.68 KiB) Viewed 1842 times

User avatar
om_tech_support_JT
Posts: 1058
Joined: Fri Mar 12, 2010 2:59 pm
Location: Torrance, CA
Contact:

Re: Connecting a PADG-SB (NPN type home sensor) to SCX11

Postby om_tech_support_JT » Mon Sep 26, 2016 4:43 pm

To clarify previous wiring diagrams, I have attached the following wiring diagrams designed to help you wire a PADG-SB (NPN output sensor) to a RKSD507-AD or RKS507-CD RK2 series stored data type driver. The 1st diagram will be the standard home sensor wiring for NPN and PNP types. The 2nd wiring diagram will show you how to connect the NPN output sensor to your stored data type driver.
Attachments
Wiring PADG-SB to RKSD507-AD, RKSD507-CD driver.pdf
(934.26 KiB) Downloaded 26 times

crossby
Posts: 3
Joined: Fri Oct 28, 2016 2:18 am

Re: Connecting a PADG-SB (NPN type home sensor) to SCX11

Postby crossby » Fri Oct 28, 2016 2:21 am

:D :D :D


Return to “Stepping Motors & Controls”

Who is online

Users browsing this forum: No registered users and 1 guest