Data setting options for BX II series*

User avatar
om_tech_support_JT
Posts: 1058
Joined: Fri Mar 12, 2010 2:59 pm
Location: Torrance, CA
Contact:

Data setting options for BX II series*

Postby om_tech_support_JT » Wed Dec 23, 2015 12:32 pm

Q: I’m using the BX series and thinking of upgrading to the newer BXII series for more driver functionality. Is the OPX-2A data setter required to change the parameters like how the OPX-1A was necessary for the BX series?

A: No, the BX II series does not require the OPX-2A hand held data setter to change the stored data or driver parameters anymore. You can simply use the digital display and buttons which are located on the front of the BX II series drivers. To change the parameters on the BXII series you use ID’s and change its set values. To view the full parameter ID list reference page 89 in the manual linked below:

http://orientalmotor.com/products/pdfs/ ... 142-3E.pdf

This is what the Operation data ID looks like for the speed control mode operation data.

BX II series data setting options - operation data ID in speed control mode.jpg
BX II series data setting options - operation data ID in speed control mode.jpg (88.91 KiB) Viewed 3779 times


This is what the Operation data ID looks like for the position control mode operation data.

BX II series data setting options - operation data ID in position control mode.jpg
BX II series data setting options - operation data ID in position control mode.jpg (135.57 KiB) Viewed 3779 times


Here's how would you access the ID parameter in parameter mode.

BX II series data setting options - button, screen transitions for ID parameter setting.jpg
BX II series data setting options - button, screen transitions for ID parameter setting.jpg (77.3 KiB) Viewed 3779 times


You can also use the MEXE02 data edit GUI software to change the stored data and driver parameters. This is a FREE download from our website. You can download it using the link below. NOTE: to connect to the software our CC05IF-USB communication cable is required.

http://www.orientalmotor.com/support/so ... tware.html

If you have further questions, please contact our technical support group or post your question here.

KR

Return to “Speed Control Systems”

Who is online

Users browsing this forum: No registered users and 1 guest