Transmission waiting time AR DC Flex

Discuss Stepper motors, Drivers, Controllers, GUI's and related Accessories here.
wakoko79
Posts: 3
Joined: Wed Sep 02, 2015 12:18 am

Transmission waiting time AR DC Flex

Postby wakoko79 » Tue Nov 15, 2016 10:43 pm

Hi,

I'm currently using an ar98 DC FLEX motor for a school project, and controlling it via RS485 comms.

The question i have is about the transmission waiting time for rs485. It says on the manual that it is not configurable via rs485, only by mexe-02 or opx-2a. But i didn't order neither mexe02 or opx-2a. Is there any other way?

om_tech_support_JS
Posts: 149
Joined: Tue May 10, 2016 4:48 pm

Re: Transmission waiting time AR DC Flex

Postby om_tech_support_JS » Mon Nov 21, 2016 9:39 am

Hi wakoko79,

The Transmission waiting time is a Parameter for the RS-485 Communication and is one of several parameters that cannot be changed via the RS-485 communication. Please reference page 133 of the manual for the information on setting the Communication waiting time:
http://www.orientalmotor.com/products/p ... 190-8E.pdf


In order to change this value, you will need to either use the OPX-2A control module, or the MEXE02 software. The MEXE02 software is a free download from our website. A link to the download is below:
http://www.orientalmotor.com/support/so ... tware.html

NOTE: In order to connect the driver to the MEXE02 software, you will need the CC05IF-USB communication cable.


We are currently offering a promotion on the CC05IF-USB communication cable. The promotion is for one free cable per company; as long as a package which requires the cable has been purchased. If your company has not yet received a free cable, then you can contact sales@orientalmotor.com to request a free cable. Please reference your order number and company name so that it can be reviewed.

wakoko79
Posts: 3
Joined: Wed Sep 02, 2015 12:18 am

Re: Transmission waiting time AR DC Flex

Postby wakoko79 » Wed Nov 30, 2016 3:11 am

om_technical_support1 wrote:Hi wakoko79,

The Transmission waiting time is a Parameter for the RS-485 Communication and is one of several parameters that cannot be changed via the RS-485 communication. Please reference page 133 of the manual for the information on setting the Communication waiting time:
http://www.orientalmotor.com/products/p ... 190-8E.pdf


In order to change this value, you will need to either use the OPX-2A control module, or the MEXE02 software. The MEXE02 software is a free download from our website. A link to the download is below:
http://www.orientalmotor.com/support/so ... tware.html

NOTE: In order to connect the driver to the MEXE02 software, you will need the CC05IF-USB communication cable.


We are currently offering a promotion on the CC05IF-USB communication cable. The promotion is for one free cable per company; as long as a package which requires the cable has been purchased. If your company has not yet received a free cable, then you can contact sales@orientalmotor.com to request a free cable. Please reference your order number and company name so that it can be reviewed.


OK, thanks. I'm currently unemployed and doing my master's thesis but I'll try.


Return to “Stepper Motors and Controls”

Who is online

Users browsing this forum: No registered users and 1 guest